Also :
17. 2 Man Show – (with Elton John)

——-[Download Links]——-

Part 1 :

Part 2 :

——-[Password]——-

ornapster

How to fix: NTLDR is missing

What happened?

When your computer starts, the BIOS attempts to find the primary hard drive’s active partition to read the first sector for the MBR (Master Boot Record), it uses that info to load the rest of the OS. For Windows NT4/2k/XP the NTLDR (New Technology Loader) takes it from there. If you get the “NTLDR is missing, press any key to restart” what’s most likely going on is the BIOS either didn’t look for the right drive, didn’t find the right partition, it wasn’t active, didn’t find the MBR, or the MBR didn’t list NTLDR in the right place, the location of NTLDR changed, or you are looking at a hardware failure situation (memory/cables/drive/motherboard/etc). Windows Vista does not boot this way, you can still use my floppy to boot into an existing installation of 98/nt/xp, but I’ve not had a chance to test Windows Vista.

Resolution

Definition:
NTLDR is Short for NT Loader, a program loaded from the hard drive boot sector that displays the Microsoft Windows NT startup menu and helps Windows NT load.

Boot to the XP CD. When it asks you if you want to install or Repair, choose Repair. This will take you to the Recovery console. Choose the XP install to log into, usually there’s only 1, and enter the password when prompted. For Home, the default password is blank. At the C:\Windows prompt type the following commands:

FIXBOOT, answer Yes
CD \
ATTRIB -H NTLDR
ATTRIB -S NTLDR
ATTRIB -R NTLDR
ATTRIB -H NTDETECT.COM
ATTRIB -S NTDETEC.COM
ATTRIB -R NTDETECT.COM
COPY X:\I386\NTLDR C:\
COPY X:\I386\NTDETECT.COM C:\

In steps 9 and 10, “X” is the letter of your CD-ROM drive.
]]> http://shihan2008.wordpress.com/2008/01/11/13/feed/ 0 Mohamed http://shihan2008.wordpress.com/2008/01/11/how-to-trace-know-any-ip-address-from-domin/ http://shihan2008.wordpress.com/2008/01/11/how-to-trace-know-any-ip-address-from-domin/#comments Fri, 11 Jan 2008 04:50:13 +0000 shihan2008 http://shihan2008.wordpress.com/2008/01/11/how-to-trace-know-any-ip-address-from-domin/ ]]>

How to Trace /  know any IP

address from Domin

From the window,

Go to start –> Run–> and in run Enter cmd

it open the command prompt

from the command prompt type ” ping” “Space” “your domin”

eg: “ping www.google.com” and press enter

it show the IP address of Domin

to trace a domin

Go to start –> Run–> and in run Enter cmd

it open the command prompt

from the command prompt type ” tracert” “Space” “your domin”

eg: “tracert www.google.com” and press enter

and then after entering it will show you the IP address of the Domin

Auto  Shutdown  your  PC

example you wish to shutdown at 11:35am. Type this in
start=>Run
Type Code: at 11:35 shutdown -s
to abort
Code:
shutdown -a

Take Note: All time are in 24hr, example u would like to shutdown at 8:30pm, you should type “at 20:30 shutdown -s” without quote…

Now A new feature is arrived from Dialog GSM SIM
That is….
How to get the alert from Dialog GSM when phone is in off mode.

To active :
**62*0777012012#

To inactive :
##02#

click here to wackyfaces